台湾固纬数字示波器GDS-2104的特点
100MHz 频宽
4输入通道
1GSa/s 即时取样率以及 25GSa/s 等效取样率
25000点之记忆体长度
5.6 吋 TFT 彩色 LCD 荧幕
支援USB HOST/DEVICE:可使用USB随身碟及 USB 印表机
支援AC/DC电源操作模式(选购)
台湾固纬数字示波器GDS-2104的技术参数:
VERTICAL |
Channels |
4 |
Bandwidth |
DC ~ 100MHz (-3dB) |
Rise Time |
1.75ns Approx. |
Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy |
∮(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
Input Coupling |
AC, DC & Ground |
Input Impedance |
1M∮2%, ~16pF |
Polarity |
Normal & Invert |
Maximum Input |
300V (DC+AC peak), CATII |
Waveform Signal Process |
+ , - , FFT |
Offset Range |
2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V |
Bandwidth Limit |
20MHz (-3dB) |
TRIGGER |
Sources |
CH1 , CH2 , Line , EXT |
Modes |
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only) |
Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 200MHz : Approx. 1div or 10mV |
EXT TRIGGER |
Range |
15V |
Sensitivity |
DC ~ 30MHz : ~ 50mV ; 30M ~ 200MHz : ~100mV |
Input Impedance |
1M∮2% , ~ 16pF |
Maximum Input |
300V (DC AC peak) , CATII |
HORIZONTAL |
Range |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
Modes |
MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y |
Accuracy |
∮0.01% |
Pre-Trigger |
20 div maximum |
Post-Trigger |
1000 div |
X-Y MODE |
X-Axis Input |
Channel 1 |
Y-Axis Input |
Channel 2 |
Phase Shift |
∮3 at 100kHz |
SIGNAL ACQUISITION |
Real-Time Sample Rate |
1GSa/s maximum |
Equivalent Sample Rate |
25GSa/s maximum |
Vertical Resolution |
8 Bits |
Record Length |
25K Dots maximum |
Acquisition Mode |
Normal, Peak Detect, Average |
Peak Detection |
10ns |
Average |
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
CURSORS AND MEASUREMENT |
Voltage Measurement |
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot |
Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle |
Delay Measurement |
Eight different delay measurement |
Cursors Measurement |
Voltage difference between cursors (V) Time difference between cursors (T) |
Auto Counter |
Resolution : 6 digits Accuracy : ∮2% Signal Source: All available trigger source except the Video trigger mode |
CONTROL PANEL FUNCTION |
Autoset |
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically |
Save Setup |
Up to 20 sets of measurement conditions |
Save Waveform |
24 sets of waveform |
DISPLAY |
TFT LCD Type |
5.6 inch |
Display Resolution |
234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule |
8 x 10 divisions ; 8 x 12 divisions (menu off) |
Display Brightness |
Adjustable |
INTERFACE |
Go/NoGo Output |
5V Maximum/10mA TTL Open Collector Output |
RS-232 Interface |
DB 9-pin male DTE RS-232 interface |
GPIB Interface (Option) |
Fully programmable with IEEE 488.2 compliance |
USB |
USB Host/Device 2.0 full speed supported |
POWER SOURCE |
Line Voltage Range |
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
Battery Power(Option |
Battery : 11.1V Li-Ion battery pack Charge Time : 8 hours (Power ON) Operating Time : 3 hours , depending on operating condition |
MISCELLANEOUS |
Multi-Language Menu |
Available |
Online Help |
Available |
Time Clock |
Time and Date, Provide the Date/Time for saved data |
DIMENSIONS &WEIGHT |
254D x 142H x 310W(mm) Approx. 4.3kg | |