| 测试电流 |
|
| |
AC 3A ~ 32A |
| 测试电压 |
| |
最大 8V AC Typically |
| 量测阻抗范围 |
| |
0 to 0.12Ω, 0 to 0.6Ω共 2 档 |
| 量测准确度 |
| |
3A ~ 5A, +10% 满刻度
5A ~ 32A, +5% 满刻度 |
| 电流表 |
| |
显示测试电流及警告设限值 |
| 阻抗表 |
| |
显示测试电阻及 Fail 与 SUBTRACTION 设定值 |
| 切换开关 |
| |
Zero-start operating switch |
| 计时器 |
| |
1S, 10S, 1MIN, 10MIN 共 4 档 |
| 警告 |
| |
Monitor the variation test current, when the test current is beyond+10% of the setting value, the warning operation will proceed.
警告设定范围 3A ~ 32A |
| SUBTRACTION |
| |
The resistance of testing line can be subtracted from the test value
The subtraction range from 0 ~ 0.1Ω
准确度 +10% |
| GO-NOGO判定设定 |
| |
If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed.
设定值范围，为测试档位的 5% ~ 100%
准确度 +15% 满刻度 (3A ~ 5A)；+10% 满刻度 (5A ~ 32A) |
| 远端控制 |
| |
高电压输入 11V ~ 15V, 低电压 0 ~ 4V 及低电流输入 20mA 以下 |
| 测试模式 |
| |
正常模式： 当警告声响起，测试停止
连续模式：当警告声响起，测试仍持续进行 |
| 蜂鸣器 |
| |
当测试失败时，提供蜂鸣声 |
| 测试频率 |
| |
50Hz 或 60Hz independent 视电源电压而定 |
| 输出信号 |
| |
TEST, GO, NG, WARNING, READY, MONITOR |
| 使用电源 |
| |
交流 100V/120V/220V/240V+10%, 50/60Hz |
| 附件 |
| |
电源线 x 1,操作手册 x 1,测试线 GHT-115 x 1 |
| This instrument is designed to test Grounding continuity resistance of the monitor, Switching power supplies, Power cord and Electronic appliances. |
购物车
您的位置：
